10 Ton Double Girder EOT Crane Specification Design is applicable to all kinds of working condition places for materials handling, equipment installation and maintenance. It is extensive general use hoisting equipment. 10 Ton Double Girder EOT Crane can be customized for various conditions with explosion-proof, insulation and other special functions working places.
1. 10 Ton Double Girder EOT Crane power supply is 220v - 660v, 3-phrase, 50/60Hz. Allowed voltage fluctuation in motor and electrical equipment upper limit is +10% of rated voltage, lower limit is -15% of rated voltage.
2. The altitude of 10 Ton Double Girder EOT Crane operating place should be less than 2000m (if above 1000m, need check the motor capacity).
3. 10 Ton Double Girder EOT Crane operational environment should not have flammable, explosive and corrosive gas.
4. Radiant temperature that lifting objects radiating 10 Ton Double Girder EOT Crane hook must be less than 300℃.
5. Outdoor use 10 Ton Double Girder EOT Crane max. wind pressure under off working condition is 800Pa (equal to 11 degree wind, 28.5-32.6m/s)
6. 10 Ton Double Girder EOT Crane normal use weather conditions
1) 10 Ton Double Girder EOT Crane indoor use
Ambient temperature ≤+40℃, average temperature ≤+35℃ during 24 hours.
Ambient temperature ≥-5℃.
Under the condition of temperature +40℃, relative humidity can not be above 50%.
2) 10 Ton Double Girder EOT Crane outdoor use
Ambient temperature ≤+40℃, average temperature ≤+35℃ during 24 hours.
Ambient temperature ≥-25℃
When ambient temperature ≤+25℃, relative humidity allow to be 100% temporarily.
Working wind pressure can not be above: inland 150Pa (equal to 6 degree wind, 10.8-13.8m/s), inshore 250Pa (equal to 7 degree wind, 13.9-17.1m/s).
About us
Crane manufacturer YuGong crane mainly supply double girder crane, single girder crane, overhead cranes, gantry cranes, eot cranes, bridge cranes, electric hoists, crane parts and related industrial cranes in China.