1. Rail Mounted Gantry Crane all shipments will be properly packaged to withstand long distance transport via ocean and land carriers, plus
numerous handlings while transport equipment to the final destination. All Equipment shall be provided with adequate protection against mechanical damage and atmospheric corrosion in transportation.
2. Rail Mounted Gantry Cranes all parts should have label categories. All screws, nuts, gaskets will be wrapped in different bags, tagged then packed into wooden box according to different usage.3. Rail Mounted Gantry Crane all spare parts and special tools should be packed separately.
4. Rail gantry crane lift points shall be identified and centers of Gravity shall be identified.
5. In addition to the electrical parts which have installed on the Rail Mounted Gantry Crane and the crane trolley, other electrical parts will be packaged in wooden case. The goods in the wooden box wrapped with PE film prevent from moisture, and then fixed in wooden box at the bottom to make sure stability during transportation.
7. Rail gantry crane all bars and railings, should be binding solidly, and well fixed during the transport.
8. Rail Mounted Gantry Crane fixed crosstie at the bottom of the trolley should be solid, so that during the transportation and lifting process, the trolley will not touchdown directly, the motor of the upper part of the trolley need to be wrapped in PE film, and with rain cover, the rain cover is in the use of flat-topped structures.
9. Rail Mounted Gantry Crane packages of wood will be through fumigation, and the plywood boxes thickness of 9mm.
